WG840727 1/6HP 1075RPM 230V SINGLE SPEED CONDENSER MOTOR

Motor Type - Permanent split capacitor, closed construction
• Finish - green/grey powdercoat
• Voltage - 208/230 VAC 60 Hz
• Single speed
• 1075 RPM
• 1/6 Horsepower
• 1.3 Amps
• Required capacitor 370 VAC 5µF
• Leads - 30" long 18 AWG
• Temperature rating 60°C - 140°F
• Equipped with automatic thermal overload
• Insulation Class - B
• Mounting Options - shaft up, shaft down, belly band
• Frame size - 39
• Bearings - sleeve
• Rotation - CW / CCW - electrically reversible
• Shaft length - 3-5/8"
• Shaft diameter - 1/2" with one flat

These motors install with all standard 48 frame mounting brackets. They are a quiet operator and electrically reversible. There is an Automatic Thermal Overload Protector and they have class B insulation. They have 30in. leads and 60 HZ with low power consumption. The motor has a standard 48 frame motor casing size and has drain holes with plugs on both end plates. There is a continuous air over on this motor and a 60 C Ambient Design with Extended Studs