Popular Searches: (Click to search) agitate
and
assembly
bearing
bell
belt
brake
comment:
drive
helix
kit
lower
pump
retaining
ring
seal
spin
the
upper
washer
Hover over In-Stock to see individual location availability
Item # | Product # | Description | Price / Availability | Add to Cart | |
---|---|---|---|---|---|
21 | 28808 | $17.60 Retail: $15.91 |
|||
10 | 27182 |
Bearing Housing Assembly (Comment: Upper)
View #10 on Diagram |
$44.40 Retail: $44.40 |
||
5 | 495P3 |
Hub and Seal Kit (Comment: Replaces 441P3; Includes 27184 Cover Gasket and 442P3 Drive Bell Seal Kit)
View #5 on Diagram |
$301.90 |
||
20 | 27155 |
Pump Belt (Comment: Pump)
View #20 on Diagram |
$9.30 Retail: $9.29 |
||
4 | 27604P |
Anti-Seize Compound (Comment: Apply to this area of both the upper and lower transmission tubes)
View #4 on Diagram |
$5.10 Retail: $5.09 |
||
14 | 31969 | Call for Availability | |||
17 | 52549 | $3.10 Retail: $3.04 |
|||
2 | 306P4 | $15.83 Retail: $10.55 |
|||
1 | 562P3 |
Siphon Break Kit (Comment: Must be installed in drain hose if the drain receptacle is lower than the cabinet top of the washer)
View #1 on Diagram |
$72.50 |
||
5 | 39508P |
Drive Bell and Seal Kit (Comment: Includes seal head, seal seat and items 3 and 4)
View #5 on Diagram |
$33.10 Retail: $33.07 |
||
14 | 31968 | Call for Availability | |||
1 | 321P4 |
Spring Hook Tool (Comment: Use to remove 5 centering springs from outer tub)
View #1 on Diagram |
$4.10 Retail: $5.46 |
||
13 | 39407 |
Mixing Valve Mounting Bracket (Comment: Replaces 27126 Mixing Valve Mounting Bracket)
View #13 on Diagram |
$5.00 Retail: $5.00 |
||
7 | 27243P |
Transmission Oil (Comment: 1 fill)
View #7 on Diagram |
$61.00 Retail: $60.96 |
||
5 | 33227P |
Transmission Assembly (Comment: Replaces 30978 Transmission Assembly)
View #5 on Diagram |
$673.40 Retail: $673.33 |
||
3 | 548P3 |
Brake Pad Kit (Comment: Includes 3 pads and sleeves)
View #3 on Diagram |
$31.30 Retail: $31.28 |
||
4 | 204429P |
Tub Assembly (Comment: Porcelain) (Replaces: 39252P)
View #4 on Diagram |
$297.40 Retail: $297.38 |
||
8 | 39122 | $5.00 Retail: $5.00 |
|||
8 | 27184 |
Tub Cover Gasket (Comment: Includes 495P3 Hub and Seal Kit)
View #8 on Diagram |
$15.20 Retail: $15.20 |
||
4 | 27179P |
Motor Kit (Comment: 2 speed; 120 Volt/60 Hertz/1 Phase)
View #4 on Diagram |
$524.90 Retail: $524.89 |
||
8 | 33489 |
Standpipe Strap (Comment: Replaces 29999 Strap)
View #8 on Diagram |
$2.30 Retail: $2.29 |
||
8 | 29210 |
Hose Clamp (Comment: Red)
View #8 on Diagram |
$5.00 Retail: $5.00 |
||
NA | 204253 | $5.80 Retail: $5.80 |
|||
2 | 294P4 |
Agitator Drive Bell Puller (Comment: Use to remove and install drive bell to transmission shaft) View #2 on Diagram |
$84.56 Retail: $61.83 |
||
33096 |
Wire Harness Assembly (Comment: Lid Switch)
View # on Diagram |
Call for Availability | |||
9 | 33098 |
Mixing Valve Guard (Comment: Models starting Serial No. R1339650XG and continuing through R1566483YG)
View #9 on Diagram |
Call for Availability | ||
12 | 31653P |
Base Assembly (Comment: Includes snubber pads and leveling legs)
View #12 on Diagram |
$84.60 |
||
13 | 32808LP |
Top and Carton Assembly (Comment: Almond)
View #13 on Diagram |
$83.80 |
||
5 | 33087 |
Wire Harness Enclosure (Comment: Models starting Serial No. R1339650XG and continuing through R1566483YG)
View #5 on Diagram |
Call for Availability | ||
11 | 33086 |
Lid Switch Guard (Comment: Models starting Serial No. R1339650XG and continuing through R1566483YG)
View #11 on Diagram |
Call for Availability | ||
13 | 32808WP |
Top and Carton Assembly (Comment: White)
View #13 on Diagram |
$189.90 |
||
32168P |
Wire Harness Assembly (Comment: Base)
View # on Diagram |
Call for Availability | |||
1 | 32746 |
24 Position Housing (Comment: Right)
View #1 on Diagram |
$3.00 |
||
2 | 32708LP |
Front Panel (Comment: Almond)
View #2 on Diagram |
$174.30 |
||
16 | 32651 |
Washer (Comment: Replaced 27015 Washer)
View #16 on Diagram |
$1.00 |
||
2 | 32708WP |
Front Panel (Comment: White)
View #2 on Diagram |
$156.40 |
||
33828 |
Wire Harness Assembly (Comment: Mixing Valve)
View # on Diagram |
Call for Availability | |||
1 | 33510 |
Fabric Softener Dispenser Assembly (Comment: Optional on some models)
View #1 on Diagram |
$25.40 |
||
3 | 38612WP |
Service Cabinet Kit (Comment: White)
View #3 on Diagram |
$250.70 |
||
10 | 803615 |
Washer (Comment: Filter)
View #10 on Diagram |
$3.10 |
||
14 | 54038 |
Nut (Comment: Use with 27126 Mixing Valve Mounting Bracket)
View #14 on Diagram |
Call for Availability | ||
10 | 507P3 |
Outer Tub Kit (Comment: starting Serial No. R1438802XN)
View #10 on Diagram |
$372.50 |
||
45380 |
12 Gauge Wire (Comment: Orange; Order wire by the foot and terminals as required)
View # on Diagram |
$5.00 |
|||
45001 |
18 Gauge Wire (Comment: Black; Order wire by the foot and terminals as required)
View # on Diagram |
$0.50 |
|||
11 | 434P3 |
Snubber Pad Kit (Comment: Includes 4 pads)
View #11 on Diagram |
Call for Availability | ||
4 | 39387P |
Tub Assembly (Comment: Stainless steel)
View #4 on Diagram |
Call for Availability | ||
3 | 38612LP |
Service Cabinet Kit (Comment: Almond)
View #3 on Diagram |
Call for Availability | ||
2 | 31314LP |
Lid and Carton Assembly (Comment: Almond; English)
View #2 on Diagram |
$99.10 |
||
9 | 38371 |
Lint Filter (Comment: starting Serial No. R1438802XN)
View #9 on Diagram |
Call for Availability | ||
11 | 38349P |
Fill Hose Kit (Comment: Hose is equipped with 1 metric and 1 standard hose coupling)
View #11 on Diagram |
$33.00 |
||
NA | 37577P |
Transmission Sealant (Comment: Use as a sealant between transmission case and cover)
View #NA on Diagram |
$103.00 |
||
6 | 35370 |
Hose Clamp (Comment: Green)
View #6 on Diagram |
Call for Availability | ||
16 | 34776 |
Bleach Dispenser (Comment: Replaces 27121)
View #16 on Diagram |
$10.20 |
||
4 | 34388P |
Motor Kit (Comment: 2 speed; 230 Volt/50 Hertz; Australia)
View #4 on Diagram |
Call for Availability | ||
1 | 34123 |
24 Position Housing (Comment: Left)
View #1 on Diagram |
Call for Availability | ||
2 | 31314WP |
Lid and Carton Assembly (Comment: White; English)
View #2 on Diagram |
$150.40 |
||
27 | 00110 | $1.70 |
|||
1 | 31249 |
End Cap (Comment: Left)
View #1 on Diagram |
$2.60 |
||
31 | 01952A |
Rubber Motor Mount (Comment: Upper)
View #31 on Diagram |
Call for Availability | ||
3 | 242P4 |
Spring Installer (Comment: Use to install brake spring)
View #3 on Diagram |
$4.90 |
||
8 | 24159 |
Valve Body (Comment: Yellow)
View #8 on Diagram |
Call for Availability | ||
1 | 24140 |
Motor Switch (Comment: Used with 30897 Emerson motor)
View #1 on Diagram |
Call for Availability | ||
1 | 24139 |
Motor Switch (Comment: Used with 30895 Emerson motor)
View #1 on Diagram |
Call for Availability | ||
11 | 24129 |
Sleeve (Comment: Short)
View #11 on Diagram |
Call for Availability | ||
3 | 24128 |
Sleeve (Comment: Long)
View #3 on Diagram |
Call for Availability | ||
4 | 21752 |
Nut (Comment: Nylon)
View #4 on Diagram |
$0.10 |
||
26 | 01953 |
Rubber Motor Mount (Comment: Lower)
View #26 on Diagram |
Call for Availability | ||
14 | 00359 |
Insulated Female Spade Terminal (Comment: 1/4 inch)
View #14 on Diagram |
$5.00 |
||
3 | 255P4 |
Seal Tool (Comment: Use to install the seal seat and the seal head)
View #3 on Diagram |
Call for Availability | ||
21 | 00223 |
Female Spade Terminal (Comment: 1/4 inch; (1) 18 gauge wire)
View #21 on Diagram |
$5.00 |
||
16 | 00215 |
Pre-Insulated Spade Terminal (Comment: 12 gauge)
View #16 on Diagram |
Call for Availability | ||
16 | 00214 |
Pre-Insulated Spade Terminal (Comment: 18 gauge)
View #16 on Diagram |
Call for Availability | ||
2 | 00188 |
Female Terminal (Comment: Used for 1 or 2 wire application)
View #2 on Diagram |
$5.00 |
||
12 | 00183 |
Female Terminal (Comment: 2 wire)
View #12 on Diagram |
Call for Availability | ||
13 | 00180 |
Female Terminal (Comment: 1 wire)
View #13 on Diagram |
Call for Availability | ||
14 | 00165 |
Insulated Female Terminal (Comment: 3/16 inch)
View #14 on Diagram |
$0.70 |
||
21 | 00121 |
Female Spade Terminal (Comment: 1/4 inch; (2) 18 gauge wires or (1) 12 gauge wire)
View #21 on Diagram |
$5.00 |
||
25 | 00113 |
Ring Terminal (Comment: 1/4 inch ring)
View #25 on Diagram |
$0.70 |
||
1 | 254P4P |
Agitator Hook (Comment: Set of 2; Use to remove agitator from drive bell by hand) View #1 on Diagram |
$78.00 |
||
NA | 258P3 |
Capacitor Kit (Comment: For areas where low voltage exists)
View #NA on Diagram |
$38.50 |
||
7 | 31248 |
End Cap (Comment: Right)
View #7 on Diagram |
$2.70 |
||
4 | 28543 |
Motor and Pulley Assembly (Comment: 2 speed; 230 Volt/60 Hertz)
View #4 on Diagram |
Call for Availability | ||
7 | 31153 |
Outer Tub Cover (Comment: Includes item 2)
View #7 on Diagram |
$69.90 |
||
1 | 30897AP |
Motor Switch (Comment: Used with 30897 General Electric motor)
View #1 on Diagram |
Call for Availability | ||
1 | 30895AP |
Motor Switch (Comment: Used with 30895 General Electric motor) (Replaces: 30895A)
View #1 on Diagram |
$31.60 |
||
26 | 00111 |
Ring Terminal (Comment: Large shank; (2) 18 gauge wires)
View #26 on Diagram |
Call for Availability | ||
10 | 30508 |
Outer Tub (Comment: Models through Serial No. R1438801XN)
View #10 on Diagram |
$140.20 |
||
4 | 30283 |
Motor Assembly (Comment: 1 speed; 230 Volt/60 Hertz)
View #4 on Diagram |
Call for Availability | ||
4 | 30010P |
Motor Kit (Comment: 1 speed; 230 Volt/50 Hertz)
View #4 on Diagram |
$229.70 |
||
11 | 29284 |
Hose Support (Comment: Mounts to base of washer)
View #11 on Diagram |
$0.50 |
||
10 | 29131 |
Hose Retainer (Comment: Mounts to rear of washer)
View #10 on Diagram |
Call for Availability | ||
4 | 28341 |
Motor and Pulley Assembly (Comment: 2 speed; 230 Volt/50 Hertz)
View #4 on Diagram |
Call for Availability | ||
32 | 27104 |
Motor Pulley (Comment: Pump)
View #32 on Diagram |
$6.20 |
||
4 | 28155P |
Motor Kit (Comment: 1 speed; 120 Volt/50 Hertz)
View #4 on Diagram |
Call for Availability | ||
14 | 27927 |
Leg Plate (Comment: .032 inches thick)
View #14 on Diagram |
$0.50 |
||
13 | 27926 |
Leg Plate (Comment: .063 inches thick)
View #13 on Diagram |
Call for Availability | ||
4 | 27837 |
U-Clip (Comment: Models through Serial No. R1339649XG)
View #4 on Diagram |
Call for Availability | ||
4 | 27658P |
Motor Kit (Comment: 1 speed; 120 Volt/60 Hertz/1 Phase)
View #4 on Diagram |
$337.10 |
||
19 | 27232 |
Recirculating Hose (Comment: Models through Serial No. R1438801XN)
View #19 on Diagram |
Call for Availability | ||
2 | 27222 |
Nut (Comment: Included with outer tub)
View #2 on Diagram |
$5.00 |
||
6 | 27176 |
Spacer (Comment: Use with item 7)
View #6 on Diagram |
$1.20 |
||
2 | 27159 |
Tub-to-Pump Hose (Comment: Models through Serial No. R1438801XN)
View #2 on Diagram |
Call for Availability | ||
11 | F200116 |
Water Hose (Comment: Hose is equipped with 2 standard hose couplings; Includes items 10 and 12)
View #11 on Diagram |
$11.70 |